How to Seal Acrylic Paint on Plastic: A Step-by-Step Guide

How to Seal Acrylic Paint on Plastic: A Step-by-Step Guide.Acrylic paint is a versatile medium that can be used on various surfaces, including plastic. However, to ensure the longevity and durability of your artwork, it is important to seal the acrylic paint properly. Sealing the paint will protect it from fading, cracking, and peeling over time. Here's how you can seal acrylic paint on plastic:

Step 1: Clean the surface
Before applying any paint or sealer, it is crucial to clean the plastic surface thoroughly. Use mild soap and water to remove any dirt, grease, or dust. Rinse the surface well and let it dry completely.

Step 2: Choose the right sealer
There are various sealers available in the market, but for sealing acrylic paint on plastic, it is recommended to use a clear acrylic sealer. This sealer is specifically designed for acrylic paints and provides a protective layer without altering the color or finish of the paint.

Step 3: Prepare your workspace
Find a well-ventilated area to work in, preferably outdoors or in a well-ventilated room. Lay down a drop cloth or newspapers to protect your work surface from any spills or drips.

Step 4: Apply the sealer
Shake the can of acrylic sealer well before using it. Hold the can about 8-12 inches away from the surface and apply a thin, even coat of sealer. Be sure to cover the entire painted area. Avoid spraying too much sealer at once, as it can cause the paint to run or bubble.

Step 5: Let it dry
After applying the first coat of sealer, let it dry completely. Check the instructions on the sealer can for the recommended drying time. It is usually around 15-20 minutes. Make sure the surface is completely dry before applying additional coats.

Step 6: Apply additional coats
For added protection, it is recommended to apply multiple coats of sealer. Apply each coat in thin, even layers, allowing each coat to dry before applying the next one. Usually, 2-3 coats are sufficient, but you can apply more if desired.

Step 7: Allow it to cure
Once you have applied the final coat of sealer, allow it to cure for at least 24 hours. Curing time may vary depending on the brand of sealer used, so refer to the instructions on the can for the specific curing time.

Step 8: Test the seal
After the sealer has cured, it is important to test the seal before handling the plastic surface. Press your fingernail gently into an inconspicuous area of the sealed paint. If the paint doesn't budge or peel, the seal is successful. If the paint lifts, you may need to reapply the sealer or try a different brand.

By following these steps, you can effectively seal acrylic paint on plastic, ensuring the longevity and durability of your artwork. Remember to clean the surface, choose the right sealer, apply thin coats, and allow proper drying and curing time. With proper sealing, your acrylic paint on plastic will stay vibrant and protected for years to come.
Back to blog